Commissioning
The first step is to install the data carriers of your choice. The M.2 slots in particular are not so easy to access later, so it’s best to install them directly.

The NAS is then switched on and should receive an IP address after a while.

A firmware update to the latest version can be carried out directly before the actual installation.

The setup then begins; in addition to the host name, a user and password are created.

The date and time must also be defined; I decided to synchronize with the NTP pool.

The IP address can then either be obtained via DHCP or stored statically on the device.

You then have to decide what should happen when new updates are available.

Finally, an overview of the options you have selected is displayed before the operating system is initialized.

The process can take a while, at the end the TS-435XeU emits a loud beeping sound.



































9 Antworten
Kommentar
Lade neue Kommentare
Urgestein
Urgestein
Urgestein
Moderator
Urgestein
Moderator
Urgestein
Urgestein
Neuling
Alle Kommentare lesen unter igor´sLAB Community →