Remote access
If you want to access the NAS outside of your own network, there are several options available, such as DDNS.
However, the easiest way is via myQNAPcloud, which requires a QNAP ID, but then handles everything via QNAP gateway servers and provides an access link in this format: https://qlink.to/IgorsLabReview
Multi-factor authentication
At the latest when setting up access from the Internet, a second factor should also be set up to secure the login.

This is possible for each user account created; the QNAP ID can also be secured with 2FA.
Automated routines
As far as I could find, there is no central location or overview for scheduled tasks. These settings are in the respective applications themselves.
Checking the data carriers and warning
A regular check of the installed data carriers based on the SMART status is carried out automatically; if problems are detected, a notification is sent.
The results and settings are retrieved via the Storage Manager.
Independent copying of USB devices
This functionality does exist, but is apparently missing here because there is no USB port on the front. This is a shame, as there is nothing to stop you connecting a data carrier with an extension via one of the ports on the rear.
Cache for the main memory
A pool of HDDs can be accelerated with an SSD as a cache, either a 2.5″ SATA SSD in one of the four slots on the front or with an M.2 SSD via the internal connection.

Incidentally, the M.2 SSDs do not burn, the flame is merely intended to represent the speed.
If the cache is active, a detailed overview of usage can even be displayed.













































9 Antworten
Kommentar
Lade neue Kommentare
Urgestein
Urgestein
Urgestein
Moderator
Urgestein
Moderator
Urgestein
Urgestein
Neuling
Alle Kommentare lesen unter igor´sLAB Community →