Grayscale, color fidelity, saturation and gamut to factory settings
In gaming, the P2710S impresses with very good performance, which – a few years ago – had to be bought at a very high price. Interestingly, the built-in IPS panel delivers significantly more when it comes to color space coverage and color accuracy.
Color space coverage
Gray Scale, Saturation, ColorChecker @ Default Settings (10 % APL)
Gray Scale, Saturation, ColorChecker @ OSD Default Windows Color Space sRGB (10 % APL)
Gray Scale, Saturation, ColorChecker @ OSD Default to DCI-P3 Color Space (10 % APL)
Interim conclusion
The factory settings give you 99% sRGB, 99% DCI-P3 and 96% Adobe RGB and the PG279QM can’t do any better. Unfortunately, the factory setting scatters in terms of the RGB balance and this leads to a very slight green cast. Furthermore, the panel does not run in sRGB in standard mode, but in the DCI-P3 color space. Based on the measured values, you can see that the measured performance only delivers good values in the P3 color space. If you want to use sRGB, you have to activate the new Windows 11 function – color management – as the P2710S does not have an sRGB profile implemented in the OSD.
However, with the Windows sRGB mode and the standard profile in the OSD, the P2710S achieves good DeltaE values, which are reflected in everyday life as usable color accuracy. Nevertheless, I would like Titan Army to add an sRGB mode to the OSD. According to an e-mail from Titan Army, this will be implemented in the future. After all, the P2510S also has an sRGB mode.
What we were able to test today is the sRGB mode, which can be emulated using Windows color management. Ultimately, this only limits the color space (very effectively) and the actual performance is then determined by the factory settings. These are not perfect on the P2710S, but they are usable. The panel also performs well in terms of contrast at 1200:1. Because IPS and contrast is always a bit difficult.
- 1 - Introduction, Features and Specs
- 2 - Workmanship and Details
- 3 - How we measure: Equipment and Methods
- 4 - Pixel Response Times
- 5 - Display Latencies
- 6 - Color-Performance @ Default Settings
- 7 - Direct Comparison and Power Consumption
- 8 - Color-Performance calibrated
- 9 - HDR-Performance
- 10 - Summary and Conclusion
13 Antworten
Kommentar
Lade neue Kommentare
Mitglied
Urgestein
Urgestein
Urgestein
Mitglied
Urgestein
Moderator
Moderator
Urgestein
Mitglied
Urgestein
Urgestein
Neuling
Alle Kommentare lesen unter igor´sLAB Community →