Monitors Practice Reviews

MSI MPG321URX QD-OLED in test – A good monitor that unfortunately puts itself completely on the sidelines in terms of price

Grayscale, color fidelity, saturation and gamut to factory settings

The fact that the Samsung QD-OLED panel can shine in terms of color space coverage should be well known. The lucky owner of such a monitor can look forward to sRGB, P3 and Adobe RGB. There is also the “infinite” contrast, which will amaze anyone who sees it for the first time. The only question that remains is whether MSI has given the MPG321URX a good factory calibration?

Color space coverage

 

Gray Scale, Saturation, ColorChecker @ Default Settings (10 % APL)

 

Gray Scale, Saturation, ColorChecker @ OSD sRGB Mode (10 % APL)

 

Gray Scale, Saturation, ColorChecker @ OSD DCI-P3 Mode (10 % APL)

 

Gray Scale, Saturation, ColorChecker @ OSD Adobe RGB Mode ( 10 % APL)

 

Interim conclusion

Once again, the factory settings do not match the standard color space at all. The panel shoots 83 percent Rec. 2020 color space in your face, which seems so blatant at first because most people have probably never seen such a color feast. The disadvantage is that most of the content on the web is mastered in sRGB and the colors then basically have nothing to do with what the creator intended. Fortunately, MSI provides a good sRGB mode for this. The other color space presets were also implemented acceptably.

MSI could offer its employees a refresher course on the RGB balance or they should visit the eye doctor regularly – you have to see these deviations. MSI leaves a little performance behind. At least MSI manages to keep the promised DeltaE < 2. I’ll turn a blind eye here because the Adobe RGB mode is slightly higher. What annoys me once again is that MSI locks these presets in the OSD – once again, you can’t adjust the RGB balance. MSI: Why?

 

 

Kommentar

Lade neue Kommentare

J
Janis

Mitglied

14 Kommentare 6 Likes

Ich hab meinen seit März und musste leider schon letzte Woche zu MSI zurück geschickt werden. Sehr helle Pixel Fehler in Blau, welche von heute auf morgen aufgetaucht sind. Pixelrefresh hat kurz geholfen und nach kurzer Zeit war dann nichts mehr zu machen.
Sehr ärgerlich und hat mich schon sehr genervt, zumal der Monitor echt nicht günstig war.

Mal schauen wie lange der Monitor bei MSI ist...

Edith:

Anbei noch die Unterschiede zwischen alten Modell und neuem.

Was klar heraussticht, ist das nun eine anti glare Beschichtung statt anti reflection verwendet wird. Mag den meisten glaube ich eher nicht gefallen.

Zusammenfassung der Unterschiede zwischen MPG 322URX QD-OLED und MPG 321URX QD-OLED:

1. Dynamische Bildwiederholrate:

322URX: Adaptive-Sync.

321URX: AMD FreeSync Premium Pro.

2. DisplayPort-Version:

322URX: DisplayPort 2.1.

321URX: DisplayPort 1.4a.

3. USB-C Power Delivery:

322URX: 98W.

321URX: 90W.

4. Helligkeit:

322URX: HDR 450 cd/m² (typisch), bis zu 1000 cd/m² (Peak).

321URX: 250 cd/m² (typisch).

5. Signalbandbreite:

322URX: 30–563.76 kHz (horizontal).

321URX: 104.88–565.44 kHz (horizontal).

7. Abmessungen:

322URX: 611.5 x 236.7 x 428.7 mm (mit Standfuß).

321URX: 718 x 242 x 483 mm (mit Standfuß).

8. Oberflächenbehandlung:

322URX: Anti-Glare.

321URX: Anti-Reflection.

9. USB-Anschlüsse:

322URX: USB 3.2 (2x Typ-A, 1x Typ-B).

321URX: USB 2.0 (2x Typ-A, 1x Typ-B).

12. Farbgenauigkeit (Adobe RGB):

322URX: 98%.

321URX: 97%.

13. Mitgeliefertes Zubehör:

322URX: Enthält ein DisplayPort-Kabel (2.1a).

321URX: Enthält ein DisplayPort-Kabel (1.4a).

Antwort Gefällt mir

Klicke zum Ausklappem
T
Tom42

Mitglied

78 Kommentare 56 Likes

'glossy' und nicht weitergelesen (n)

Antwort Gefällt mir

Igor Wallossek

1

13,159 Kommentare 26,153 Likes

View image at the forums

Antwort Gefällt mir

J
Janis

Mitglied

14 Kommentare 6 Likes

Also mal kurz angemerkt:

Bei MSI gibt es schon (oder kommt demnächst) das Nachfolger Modell in Form des URX322, mit DP 2.1 und anti Glare Beschichtung.

https://www.msi.cn/Monitor/MPG-322URX-QD-OLED/Overview

Antwort 1 Like

T
Tralien

Veteran

293 Kommentare 91 Likes

welcher der beiden ist jetzt glossy und welcher matt? immer diese fachbegriffe 🤣

Antwort Gefällt mir

J
Janis

Mitglied

14 Kommentare 6 Likes

Der alte ist glossy, der neue laut Website matt.

Antwort Gefällt mir

ssj3rd

Veteran

378 Kommentare 253 Likes

Glossy und OLED Panels sollten eigentlich immer zwingend Hand in Hand gehen.

Antwort 2 Likes

Lagavulin

Veteran

360 Kommentare 302 Likes

Vielen Dank für den Test! Ich stehe unmittelbar vor dem Kauf eines 32“ QD-OLED und der MPG321URX wäre meine erste Wahl, aber nicht zum derzeitigen Preis.

MSI hat von Anfang an versucht, den Monitor in Deutschland zu einem wesentlich höheren Endverkaufspreis abzusetzen als in den USA. In den USA kostet er seit Einführung 950 US$ (ohne Steuern – weil da jeder Bundesstaat seinen Steuersatz selbst festlegt). 950 US$ sind derzeit ca. 903€ – das ergäbe ca. 1.075€ inkl. MWSt.

Ich werde erst mal abwarten ob der Preis runtergeht, wenn der angekündigte Nachfolger auf den Markt kommt.

Antwort Gefällt mir

ArthurUnaBrau

Veteran

393 Kommentare 201 Likes

Warum würdest du ein mattes Display wollen, das an sich perfektes Schwarz darstellen? Das widerspricht sich.

Antwort Gefällt mir

Lagavulin

Veteran

360 Kommentare 302 Likes

Beim Thema Coating hat halt jeder seine persönlichen Präferenzen.

Von Simon Baker (TFTCentral) gibt es einen Testbericht zum Samsung Odyssey G80SD (der erste QD-OLED mit matte anti-glare coating). Dort werden im Kapitel Panel Coating die Vor- und Nachteile der unterschiedlichen Coatings verglichen.
https://tftcentral.co.uk/reviews/samsung-odyssey-g80sd

Antwort Gefällt mir

Lagavulin

Veteran

360 Kommentare 302 Likes

Zum Nachfolgemodell gibt es inzwischen von MSI auch eine Website in englisch:
https://www.msi.com/Monitor/MPG-322URX-QD-OLED

Bringt es eigentlich einen Vorteil, wenn ein Monitor DP 2.1 mit UHBR20 unterstützt, anstatt DP 1.4 mit DSC?
Ich frage, weil ich auf eine RTX 5090 umsteigen will, die das unterstützen soll (wenn die Gerüchte stimmen).

Nachtrag: Ich ziehe die Frage zurück (manchmal hilft halt doch die Suchfunktion). Es gibt einen Thread zu dem Thema:

Antwort Gefällt mir

Klicke zum Ausklappem

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Igor Wallossek

Editor-in-chief and name-giver of igor'sLAB as the content successor of Tom's Hardware Germany, whose license was returned in June 2019 in order to better meet the qualitative demands of web content and challenges of new media such as YouTube with its own channel.

Computer nerd since 1983, audio freak since 1979 and pretty much open to anything with a plug or battery for over 50 years.

Follow Igor:
YouTube Facebook Instagram Twitter

Werbung

Werbung